Best Obs Settings For 1080i Vs 1080p
CLICK HERE ::: https://cinurl.com/2sXCC7
In the United States, there are two standard resolutions for cable TV broadcasts: 720p and 1080i. Much like 1080p, the number refers to the vertical resolution of the screen, 720 and 1080 pixels. The letter refers to either progressive scan or interlaced scan. Every TV sold today uses progressive scan, but they're also compatible with a 1080i signal.
The 1080p standard has all but replaced 1080i. You can still find TVs with 1080i screens, but these are less common. Likewise, 4K resolution and UHD have started to replace HD, though you can still find plenty of HDTVs on the market.
Among the many technical aspects surrounding live streaming, there are a few things every streamer should now be able to choose the best live streaming settings for Facebook, YouTube, Twitch and any other platform. The best settings for live streaming are not necessarily the highest quality settings. Apart from the video quality, when it comes to live streaming, bitrates, encoding and latency are just as important.
Before you can decide the best live streaming settings for your live videos, you need to know what goes into it. These are a few technical aspects of live streaming of which every streamer should be aware.
The best YouYube bitrate settings for your stream can vary greatly because it relies on many factors. If you are unsure of the best bitrate for your stream, you can leverage a live encoder software such as ManyCam, which can define it automatically for you to achieve the best possible quality.
Since YouTube is a video-first platform, as you can see, there are many options when it comes to live streaming. The best live streaming settings will again depend on your live streaming setup. You should always aim for the highest quality stream, as long as it gives you a reliable stream base.
To find the sweet spot between stability and quality, you will need to run several tests. When determining the best encoding settings for live streaming, you should start with the fastest encoding preset. Make sure that works well. Then, slowly increase the quality to find out when you start losing stability.
When I watch other people streaming online live events their stream look crisp and sharp but mine are of poor quality. My source is 1080i but I cannot seem to select that option in canvas size or encoder settings. Only frame size (1920x1080) and frame rate (25/50). To me 25 would suggest P and 50 would suggest i but I am not sure if that is correct? I do not think so.
"If the source quality is an issue you can't improve it by pushing the but rate. Encoding never improves quality. It only minimizes loss. That's fundamental to "lossy" encoding and not specific to Wirecast." I 100% understand this. It is a European wide major sporting event in and the EVS XT is taking the satellite downlink as a 1080i50 feed. Maybe that is a encoder option the other side, at the event, but it is a broadcast quality signal. From what I can tell online I should be getting zingin crisp pictures off it. I was just wondering if am I clicking the wrong button or using the wrong settings. I can't seem to find the right combination. But from what you say other than changing my source to 1080P (which I don't think I can do but I will try) there is nothing else to try? My current settings are 1280x720/50, intel encoder/high/best, 6000bits, key frames 2, strict constant bit rate, stereo, 128, 48k. The cpu is running at 20%. But I have tried a lot a variation with little success.
Above I said "My current settings are 1280x720/50, intel encoder/high/best, 6000bits, key frames 2, strict constant bit rate, stereo, 128, 48k. The cpu is running at 20%. But I have tried a lot a variation with little success." This is now change to 25 on your advice. I am willing to try what ever setting you suggest. Do you favor one encoder over the other? What bit rate do you recommend? What setting increases the quality of the stream? Is it just based on bitrate? Or is it a fine balance? What is the balance?
Today, televisions throughout the world use the standard window sizes known as High Definition or HD. There are two different sizes recognized by that standard usually displayed as 1080p/1080i or 720p/720i. The window size for those are 1920 pixels wide x 1080 pixels high, or 1280 pixels wide x 720 pixels high, respectively. A pixel is the smallest dot on a screen that is made up of a red, green and blue light source.
There is a fine line when making sure the quality of the video remains acceptable, and the viewer of the video doesn't experience any hiccups when they watch. Below we give you our collective years of experience to recommended our preferred settings using some of the terms we outlined above. This helps us provide you with the best possible outcome when distributing your video through MultiVu.
Nearly all modern video cameras (PAL UK models) can do 1080p. Some but not all will do 1080i as well. In essence the choice of camera depends largely on how much you want to spend and what type of activity you want to film.
Most TV models have menu settings that automatically determines the best way to show the picture on the screen. Depending on your TV type, these general steps are provided to turn on or off the Auto Wide feature. Check your TV manuals for model-specific information.
ATEM Mini features built in video conversion on every input. This means that all video inputs, in any HD format such as 720p, 1080i or 1080p can be connected and converted to the desired program output format.
As no one does new production work in standard definition any more, ATEM Mini is HD only and supports popular 720p, 1080p and 1080i HD formats. We feel that SD is only used for archive work and accessing older content so SD would not be used to generate new original content.
Thank you for the simple way you explain the requirements. I having doing live streams on Facebook with a Samsung tablet A. I started out using mobile data got spot from a cell phone. I am not aware of the uploaded speed that they offer but there was not much is sure there apart from the using up of the monthly location.We have since installed a fibre network which provides 20down 5up. I am not sure if the 5up is stable however I have started to try adding youtube to the live stream to capture more audience.To do this I have tested out retreat io and Larix Broadcaster however I have noted that I have been having buffering isuures.I am told that FB requires 4mbs and youtube 6mbs and it is best to only stream to one. And I see that with 5mbs offered by the network the bandwith will not give the head room.My interest is setting the bitrates to match the network. In larix the audio bitrate is set at 128kps and video at 2500kps keyframe 2 with a 1088×1088 resolution.With these settings what adjustment would you recommend? 2b1af7f3a8